Winix AIR PURIFIER
5300-2
replacement filter
YOUR FILTER MATCH
Filter A
115115
The linked source lists this model. Checked 2026-09-18. Availability and price may change.
Find this filter on Amazon
As an Amazon Associate I earn from qualifying purchases.
View on Amazon ↗Check the selected variant, seller, and package quantity before ordering. Availability varies; this link does not guarantee stock.
- Manufacturer
- Winix
- Purifier model
- 5300-2
- Replacement guidance
- Replace the HEPA filter every 12 months and the carbon filter every 3 months.
- Manufacturer source package
- One HEPA filter and four carbon filters.
Replace the filters in your 5300-2
- Switch off and unplug the purifier. Pull the front panel gently from its upper edge, then remove the pre-filter and used replacement filters.
- Unwrap the new filters. Seat the HEPA at the back, the activated carbon filter in the middle, and the pre-filter at the front.
- Refit the front panel before reconnecting power.
Reset the filter light
With the new filters installed and panel closed, turn the purifier on. Use a thin object such as a paper clip to hold the recessed Filter Reset button for at least 5 seconds, until the beep and the indicator goes out.
Do not wash the HEPA or activated carbon filters. The reusable pre-filter has separate cleaning instructions in the manual.
Read the Winix manual (PDF) — page(s) 1 (Initial Operation, Replacing Filters and control diagram). Checked 2026-09-21. 5300-2 user manual. Follow the full manual if your controls differ.
Compatibility source
Winix filter product information ↗
This page reports model-to-filter compatibility. It does not independently test filtration performance or certify third-party alternatives.