Winix AIR PURIFIER
AM80
replacement filter
YOUR FILTER MATCH
Filter H
116130
The linked source lists this model. Checked 2026-09-18. Availability and price may change.
Find this filter on Amazon
As an Amazon Associate I earn from qualifying purchases.
View on Amazon ↗Check the selected variant, seller, and package quantity before ordering. Availability varies; this link does not guarantee stock.
- Manufacturer
- Winix
- Purifier model
- AM80
- Replacement guidance
- Replace this filter set approximately every 12 months; conditions can shorten its service life.
- Manufacturer source package
- HEPA and carbon filter set.
Replace the filters in your AM80
- Switch off and unplug the purifier. Pull the front panel gently from its upper edge, then remove the pre-filter and used replacement filters.
- Unwrap the new filters. Seat the HEPA at the back, the AOC carbon filter in the middle, and the pre-filter at the front.
- Refit the front panel before reconnecting power.
Reset the filter light
With the new filters installed and panel closed, turn the purifier on. Use a thin object such as a paper clip to hold the recessed Filter Reset button for at least 5 seconds, until the beep and the indicator goes out.
The HEPA is not washable. If you rinse the washable AOC carbon filter, follow the manual’s cleaning instructions and dry it completely for at least 24 hours before reuse.
Read the Winix manual (PDF) — page(s) 1 (Initial Operation, Replacing Filters and control diagram). Checked 2026-09-21. AM80 user manual. Follow the full manual if your controls differ.
Compatibility source
Winix filter product information ↗
This page reports model-to-filter compatibility. It does not independently test filtration performance or certify third-party alternatives.